How To Sanitize A Carpet Without Steam Cleaner?
For so many reasons, cleaning your office carpet can be a hassle, especially if you don’t have a steam cleaner handy. Most carpet cleaning companies require access to hot water and steam to sanitize the carpet, which means renting a machine or paying more money for services you might not need.
Luckily, you can use plenty of methods at home to sanitize your carpet without using steam or hot water.
What Is Carpet Sanitization?
Carpet sanitization is the process of cleaning and disinfecting the carpet. One way to do this is by spraying vinegar and scrubbing it with a brush. White vinegar is a natural disinfectant that can also remove stains from your carpet.
It’s not necessary to use a steam cleaner for this task, though it does make it easier because the water will loosen up dirt and grime, so you can vacuum them up after you’re done.
If you want to get rid of stubborn stains like coffee or tea, spray your carpet liberally with white distilled vinegar and let it sit overnight before blotting the area with paper towels or a sponge (without letting any liquid seep into the padding). If this doesn’t work, try using a paste made from baking soda and lemon juice instead.
What Can I Use To Sanitize My Carpet?
Using a bucket and cup, you can sanitize your carpet without a steam cleaner. You will need to fill the bucket with water and add a cup of white vinegar. The ratio should be 1:1.
Dip the part of the carpet you want to be cleaned in the solution so that it is saturated, and then scrub in small circles until you feel satisfied with how clean it feels. hen rinse off any residue with a garden hose or outside tap.
When doing this, it is important to rinse the dirt as well as possible so that bacteria do not start building up again.
They might like to lay on wet carpets and make them dirty again if you have pets! Vacuating at least once per week is recommended for people with children or pets.
How To Sanitize Carpet In Your Workplace
Carpet steam cleaners are great for deep cleaning carpets, but they can be a hassle to use. Plus, you may not even have one available. There are many ways to sanitize and disinfect your carpet without a steam cleaner. Here are some of the most popular methods of sanitization that people use in their workplace on their carpets:
#1: Baking Soda
Sprinkle baking soda onto wet carpet areas, then let it dry for at least 24 hours.
For tough stains, mix 1/4 cup of white vinegar with 2 cups water and pour onto the area before letting it dry for at least 24 hours. This will help remove odors and kill bacteria in your carpet. You may need to do this more than once.
#2: Lysol
Use Lysol spray on your carpet by spraying it directly onto the surface or into a clean spray bottle, then apply evenly to the surface of your carpet and let air dry for at least 24 hours.
#3: Vacuum
Vacuuming is an excellent way to clean up any loose dirt from your carpets and get rid of dust mites and other allergens that can make breathing difficult. Vacuum often enough so as not to disturb dirt or dust too much (at least every other day).
#4: Bleach
Mixing equal parts bleach and water is another option for cleaning stubborn spots out of workplace carpets.
Why You May Need Carpet Sanitizing Service
No matter how clean you keep your house, there are bound to be some icky substances that seep through the cracks. One of those substances is mold. And if left untreated, mold can grow and become a real problem for your family’s health. So how do you sanitize carpets without steam cleaner?
The best way is to call in a professional carpet sanitizing service, but they’re expensive and not always available. Luckily, there are some things you can try at home to help get rid of the problem before it becomes worse.
Mix one bleach with three parts water and apply with a cloth or sponge. The mixture will need time to set before reapplying. Repeat as needed until no stains remain.
Some other methods for getting rid of the problem are using baking soda, vinegar, or hydrogen peroxide alone, as both will kill germs on contact while leaving your carpets smelling fresh!
Can You Sanitize Carpet Without Steam Cleaner?
First, you should vacuum your carpet thoroughly. Once the area is vacuumed, you need to sprinkle baking soda onto it and allow it to sit for at least an hour. Then, gently brush the baking soda into the carpet, and take a nylon brush or broom.
Next, mix one part vinegar with two parts water in a spray bottle and saturate your carpet until it is damp but not soaked.
After vacuuming again, sprinkle salt on the wetted area of your carpet and allow it to sit for about an hour before vacuuming again.
You should then repeat this monthly process to keep your carpets clean and healthy!
How Can I Disinfect My Carpet?
- Clear off any furniture from the area that you want to sanitize.
- Mix a solution of 3/4 cup (180 mL) of chlorine bleach and 1 gallon (3.8 L) water in a clean bucket, then use a clean cloth to apply it over the carpet. Let the mixture sit on the carpet for five minutes before wiping it with paper towels or rags. Allow the area to dry thoroughly before putting furniture back into place and running your vacuum cleaner over it.
- If you have pets, don’t forget to give them a quick bath afterward!
- For best results, steam-clean the carpet after treatment.
How To Choose A Carpet Cleaning Company
Choosing the right carpet cleaning company is important in ensuring that your carpets are clean. There are a few questions you should ask before hiring a company to do the job for you to make sure that they will be able to meet your needs:
- Is the company insured?
- Do they offer senior citizen and military discounts?
- Do they have experience with your specific kind of carpeting?
These are just a few things you need to consider before deciding which company to hire.
Make sure you keep in mind how long it will take for them to return to your house and what methods they use to clean your carpets. These can vary from wet vacuuming, steam cleaners, or dry extraction cleaners, each having its benefits and drawbacks compared with other methods.
You might also want to consider whether there is any furniture in the area where they’re working- some machines may not work on furniture because it leaves too many deep impressions in the upholstery!
Conclusion
Carpet sanitizing is a great way to keep your carpets looking and feeling clean, but it can be expensive. A steam cleaner can cost upwards of $150, which would consume most people’s budget. Luckily, you can do a few things to clean your carpets without having to invest in a steam cleaner.
First, shampoo your carpet using a simple homemade recipe consisting of 2 cups vinegar and 1 cup baking soda. Pour the mixture into an empty spray bottle or mop bucket, then sprinkle some over your carpet before scrubbing in with a sponge or vacuum. This will help get rid of dirt and stains that might have been missed during previous cleanings and give it an overall boost in freshness. Call Maintenance One 24/7 Cleaning Services.
Looking for commercial office cleaning in a specific location? Contact One Of Our Locations today!
Commercial Cleaning Company Connecticut
Commercial Cleaning Company In Virginia
